Fencing

24' long by 5.6' tall 3/4" sucker rod $165 for ones without pin holes. $180 For ones with pin holes and pins. Also sell 8 foot or 10 foot 2 7/8 wellpipe posts ask for price.

24' sucker rod panels

Tuttle, ND

$165

2025-01-18 13:33:03

Precast concrete hog panel

2' X 3' X 2" thick; also have 24" X 30" available 150 pounds each / 80-90 quantity available slats are 5" X 120"

Dickinson, ND

$25

2025-01-17 20:46:24

for sale made of 3/8 round these clips can be universal so they will fit anything 1 inch and smaller 75 cents a piece

Sucker rod clips

Watford City, ND

$0.75

2025-01-17 20:45:39

50 Gate openers for sale mount on a wood post with 4 screws makes opening gates ea

sy take one or take all $30 a piece

Watford City, ND

$30

2025-01-17 15:26:18

$480 a panel with two 3ft chains on both ends with reinforced ends. $420 a panel with one 2ft chains on both ends All panels built to order

Free standing panels

Fortuna, ND

$420

2025-01-17 05:23:33

Electric Netting

ElectroStop® 10/42/12 (164' x 42" white/black roll), double spike Brand new never used 2 rolls

Linton, ND

$300

2025-01-14 16:21:16

Freestanding short windreak panel

21ft long with 1 sheet of super steel on it! Has 3 3/4 rods welded on the backside. No chains Just have the 1 available

Glen Ullin, ND

$400 OBO

2025-01-14 11:57:26

Sheep/Goat free standing panels

Holds both sheep and goats only a couple inches off the ground. 6 rods 40inches tall 24ft long Chain hock and chain

Dickinson, ND

$300 Each

2025-01-14 11:57:13

New Galvanized Supersteel sheets $85 New 24ft long. 3ft wide. 22ga Supersteel Windbreaks free standing Panels $725 Free Standing panels $350 27ft Guardrail Windbreaks $950 Bottomless Guardrail

Supersteel Sheets

Dickinson, ND

$85

2025-01-14 11:57:10

15 Photos

Free Standing Panels

24 ft Full Frame Free Standing Panels $420 24ft Non-Full Frame Free Standing Panles $350 Made with 2 7/8 pipe and 1inch sucker rod Windbreak panels, calf shelters, bottomless bunks, and

Dickinson, ND

$420

2025-01-14 11:56:59

12 Photos

Guardrail windbreak panels

Free standing guardrail wind break panels. 26ft long--7 ft 6inch high. Easy to move with just a bucket, no chains or grapple required. Weigh about 1300 lbs. Solid or removable legs for easy

Dickinson, ND

$950

2025-01-14 11:56:46

1 1/4 fiber rods $8 each 3/4 in 7/8 in 1 in 2 7/8 pipe $49 2 3/8 pipe $55

Bundles of sucker rod

Dickinson, ND

2025-01-14 11:56:19

24ft free standing windbreak panels

24ft long Made with 22 gauge super steel 2 7/8 pipe Chain hooks and chains included Have multiple on hand Delivery available 7012608564 Slant windbreaks

Dickinson, ND

$750

2025-01-14 11:56:05

Nice straight semi used ties Pick and choose Can load $12 per tie

Used rail road ties

Dickinson, ND

2025-01-14 11:55:59

27/8 10ft post. $26 27/8. 5ft post. $15 1 1/2 brace bar. $18. Tabs welded on Clamps $4 each - comes with bolts and Nuts Multiple available Been using them on our fences for 8 years

Pipe Fence braces

Dickinson, ND

$65 Each

2025-01-14 00:14:52

Hi-tensile wire spinning jenny dispenser

Selling a Dare adjustable dereeler typically used to unroll 4000 ft. hi-tensile electric fence wire. Works good mounted behind an ATV/UTV. Has a friction

Balta, ND

$40 OBO

2025-01-13 18:00:26

2 3/8, 2 7/8, 4in structural pipe for sale.

2 3/8, 2 7/8, 4 structural pipe for sale.Located in Glendive, MT. All pipe is norm tested.Transportation available throughout Montana, North Dakota, and South Dakota. Call 406-939-0469 for pricing

Glendive, MT

Multiple Prices

2025-01-13 10:51:19

2 7/8 drill stem pipe can deliver

Mandan, ND

$54

2025-01-11 11:42:43

About 75 2 7/8 heavy wall pipe 8ft post8ft 2 7/8 pipe post $15 each

Dover, ND

$15

2025-01-10 07:08:42

6 Photos

24 ft free standing panels

24 ft panels 24 ft windbreakpanel 24 ft adjustable alley way 24 ft panel with 360 degree hinge to hang a gate on various sizes of gates 16 ft down to 4 ft also have atv

Garrison, ND

Multiple Prices

2025-01-10 07:08:30

Tractor drive through gate

14 foot spring up drive through gate for tractor or skid steer

Garrison, ND

Contact for Price

2025-01-09 15:12:16

5' x 24' and 6' x 24' Free Standing Panels.

Please contact Pete at 701-400-5319 for pricing and information!

Carson, ND

Multiple Prices

2025-01-07 11:35:16

I have 2 x 8 and 2x10 any where from. 8-16 ft long priced at 7.00 a board numours

boards mostly 16 and 14 ft long serious calls I will send pictures to thx

Underwood, ND

2025-01-07 10:54:57

T posts, 5 1/2' & 6' mixed

345 T posts, 55 U posts T's are 5 1/2' & 6' mixed $2.50/each, U-posts are negotiable. A dozen or so welded wire stock panels in good condition, not pictured, 16' x 50" I think $20/each 2 coral

Jamestown, ND

$2.50

2025-01-07 09:10:12

5 Photos

6 bow gate custom gate frame w gate 6wide and 7 tall several available and

6’ bow gate custom gate frame w gate 6’wide and 7’ tall several available and custom orders welcome built with 2. 7/8” tubing welded on a 45degree for a stronger weld Located out of

Richey, MT

$500

2025-01-07 09:04:45

Heavy-Duty Gate Slam Latch

If you're in the market for a Gate Slam Latch, look no further. We have exactly what you need to secure your property. Our Heavy-Duty Gate Slam Latch is a durable and reliable way to keep your

Bismarck, ND

$54

2025-01-06 22:27:54

New Prime Gray Super Steel. Galvanized & Bare steel also available. 24ft super ste

el windbreaks, calfshelters, Guardrail windbreak, fence line feedthrough panels, bale feeders and much More!! Delivery

Dickinson, ND

$85

2025-01-03 18:16:51