Home > Floyd Roll
Empty Profile Photo
Floyd Roll
Minot, ND

About

Floyd Roll resides in Minot, ND and has been with us for over 13 years.

Floyd Roll's Listings

Floyd Roll
2024-10-03 19:25:48
2 Photos
Chain Hoist | Ratchet | Come Along 3/4 ~ 1 Ton
Pull Lift 2 Chain Made in USA
Tools - Minot, ND
$125  OBO
Floyd Roll
2024-10-03 19:25:26
2 Photos
Cadillac 2007-2014 Escalade Chrome Wheel Center Cap 22" 7 Spoke Rim 200mm
Parts & Accessories - Minot, ND
$15
Floyd Roll
2024-10-03 19:25:00
3 Photos
Kwik-Switch 400 Double Taper XZ Collet Chucks with 11 Collets
Universal Engineering, (2) p/n 80422, 1 Nut p/n 551108, Two Bearing Type Nuts (No p/n's) Includes a NMTB-50 Chuck p/n 55240 and 11 XZ
Tools - Minot, ND
$180
Floyd Roll
2024-10-03 19:24:41
3 Photos
NMTB50 Taper Nikken Multi Lock Milling Chuck CA50 1-5/8" Set
Includes Wood Case and 10 Collets: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8" 1", 1-1/8", 1-1/4". These milling collets slip in and out
Tools - Minot, ND
$140
Floyd Roll
2024-10-03 19:24:25
3 Photos
Kwik-Switch 300 Collet Chuck TG100 Universal Engineering p/n 803469
Tools - Minot, ND
$45
Floyd Roll
2024-10-03 19:24:02
3 Photos
Kwik-Switch 300 Boring Head Adapter Universal Engineering p/n 95341
Tools - Minot, ND
$50
Floyd Roll
2024-10-03 19:23:42
3 Photos
OZZ Boring Head w/Kwik-Switch 400 Adapter, KS-400 ZZ Collet Chuck & 5 Collets
Boring Head p/n 95298, Chuck p/n 80421, Nut(s) p/n 551098, Collet Sizes: 1/2", 5/8", 3/4", 13/16" & 1". Collets hold
Tools - Minot, ND
$250
Floyd Roll
2024-10-03 19:23:20
ERICKSON DA180 Collet Extension Holder
Straight Shank 1" x 3" w/1-1/4" Sleeve. Includes 5/16" and 5/8" DA180 Collets
Tools - Minot, ND
$50
Floyd Roll
2024-10-03 19:23:03
3 Photos
NEW! ISCAR DZ044-099-40-06 HELIQUAD INDEX DRILL w/10 Inserts
Coolant Thru 44mm ~ 1.732283" Includes Factor Pack of 10, WOLH 3-1-GF Grade IC328 ISCAR Inserts (Slow to Medium Feeds). Can also use WOLH
Tools - Minot, ND
$180
Floyd Roll
2024-10-03 19:22:46
3 Photos
NEW! Kwik-Switch 400 Milling Chuck, 5 Mill Collets, +Acura-Flex Collet Nut
Universal Engineering Acura-Flex Chuck p/n 804290, Milling Collet Nut 901376, Includes 5 Positive Retention Type MILL Collets,
Tools - Minot, ND
$200
Floyd Roll
2024-10-03 19:22:21
2 Photos
1972-76 Duster Fender / Rear Tail Panel Emblem
Parts & Accessories - Minot, ND
$40
Floyd Roll
2024-10-03 19:22:03
2 Photos
NEW! Dorian D25AXA-36 #36 5C Collet Holder Lathe Tool Holder
The label reads 1/16" to 1.0" Tool Capacity, but I have both a 1-1/16" and 1-1/8" 5C Collet and they fit too.
Tools - Minot, ND
$100
Floyd Roll
2024-10-03 19:21:43
3 Photos
NEW! Lathe Collet Chuck 32mm Straight Collet MLC32 +19 Collets
10 NEW iGeshi C32mm Straight Shank Collets 5, 7, 9, 10, 16mm (5/8"), 17, 18, 20, 23, 25mm,+9NEW Lyndex 32mm x, 1/8", 3/16", 1/4", 5/16",
Tools - Minot, ND
$250
Floyd Roll
2024-10-03 19:21:20
3 Photos
R8 1-1/2" Schell Mill Arbor
Tools - Minot, ND
$35
Floyd Roll
2024-10-03 19:20:43
3 Photos
NMTB40 Taper Nikken Multi Lock Milling Chuck CA40F-1-1/4" with 4 Collets
Includes 3/8", 9/16", 3/4" and 1" Nikken Straight Shank Collet Sleeve's. Collets Insert into the Nose of the Chuck so there
Tools - Minot, ND
$80
Floyd Roll
2024-08-29 21:31:07
3 Photos
Mercury Mariner OEM 90HP-3CLY 2 Stroke Carb Carburetor Rack Set of 3
Boats - Minot, ND
$150
Floyd Roll
2024-08-29 21:30:36
3 Photos
Dorian D35CXA-881 Universal Lathe Threading & Grooving Holder
Has the Out Side Thread Adapter p/n TIH354-32 , The Holder can accept an inside Thread Adapter as well (Not Included). Does Include a
Tools - Minot, ND
$80
Floyd Roll
2024-07-20 13:49:28
3 Photos
NEW! ROHM Lathe Live Center MK 5 (MT5) 110H
MT: 5 Shank, Size: 110 H Workpiece weight max. kg: 2000 [4409.245 LBS] , Concentricity deviation max. mm: 0.005 [0.000197"], Rotation speed max. rpm:
Tools - Minot, ND
$417
Floyd Roll
2024-07-20 13:49:09
2 Photos
NEW! Hougen Rotabroach Morse Taper 5 | MT5 Coolant Thru Arbor #49908
NEW! Hougen Rotabroach Morse Taper 5 | 5MT Coolant Thru Arbor #49908 for use with 1-1/4" Series 53000. Made in USA!
Tools - Minot, ND
$100
Floyd Roll
2024-07-20 13:48:50
3 Photos
FORD FE Factory 3 Deuce | Intake and Carburetor Assembly OEM 406 427 428 390 CID
Parts & Accessories - Minot, ND
$3,000
Floyd Roll
2024-07-20 13:48:33
3 Photos
Foundry Cast Wall Mount 6 Blade Industrial Fan Vintage Steampunk
Outside Diameter 26-3/4", Inside Diameter 23-3/8", Width 12-1/4"
Industrial Supply - Minot, ND
$225
Floyd Roll
2024-07-20 13:48:12
3 Photos
EXCELLENT! Bison 6-1/4" 6-Jaw SET-TRU Scorll Lathe Chuck w/Bison D1-3 Back Plate
Unique Micro-adjustment Feature Enables Concentricity to-.0005" TIR, w/Fine Adj. Scroll and Jaws are Hardened and
Tools - Minot, ND
$1,200
Floyd Roll
2024-07-20 13:47:50
3 Photos
1/2" Kwik-Switch 400 End Mill Holder Universal Engineering p/n 80443
Tools - Minot, ND
$35
Floyd Roll
2024-07-20 13:47:32
3 Photos
5/8" Kwik-Switch 400 End Mill Holder Universal Engineering p/n 80444
Tools - Minot, ND
$35
Floyd Roll
2024-07-20 13:47:14
3 Photos
3/8" Kwik-Switch 400 End Mill Holder Universal Engineering p/n 80442
Tools - Minot, ND
$35
Floyd Roll
2024-07-20 13:46:49
3 Photos
Mercury Mariner Quicksiver 90HP-3CLY Outboard OEM Switchbox & Ignition Coils
OEM Switchbox PN 332-7778A1, Ignition Coils PN M 2936
Boats - Minot, ND
$40
Floyd Roll
2024-07-20 13:46:29
Mercury Mariner Outboard 90HP-3CLY OEM Power Trim Relay Switchs PN 8996158
Price is for all three.
Boats - Minot, ND
$20
Floyd Roll
2024-07-20 13:45:59
3 Photos
NEW! Dorian Quadra OD/ID Lathe Threading Holder QITP25N-881
Includes a TNMC 32NV CM14 Thread Insert
Tools - Minot, ND
$175
Floyd Roll
2024-07-20 13:45:46
3 Photos
Dorian Super Quick Change SD35CXA Lathe Tool Post with 2 Holders
DORIAN #D35CXA-7-71C Extra Heavy Duty CUT-OFF BLADE Lathe Tool Holder & a Generic Turning/Facing Tool Holder. Tool Post is missing
Tools - Minot, ND
$150
Floyd Roll
2024-07-11 15:14:16
2 Photos
NEW! DORIAN QITP-50 QUADRA Quick Change Indexing Lathe Tool Post & 4 Tool Holders
NEW! DORIAN D50DA-2 Boring Turning & Facing Holder. Plus 3 more used tool holders, a DORIAN D50DA-6 Quick Change
Tools - Minot, ND
$1,250
Floyd Roll
2024-07-11 15:13:54
2 Photos
Antique Chain Hoist Block & Pulley 1.5 Ton Wright 414 C
Antiques - Minot, ND
$60
Floyd Roll
2024-07-11 15:13:24
3 Photos
Kwik-Switch 400 Series TG150 Collet Chuck with a 1-1/2" Collet
Tools - Minot, ND
$60
Floyd Roll
2024-07-11 15:13:00
3 Photos
NEW! DORIAN SDN35CXA Lathe Quick Change Tool Post, CXA, 14-17 In Swing
Fully interchangeable with Aloris and other standard tool posts. Holding force produces over 20,000 lbs. per sq. inch. The Good
Tools - Minot, ND
$480
Floyd Roll
2024-07-11 15:12:34
3 Photos
Milling Vise Base | Universal-Base
Clamping Circle 6-3/4' Top. Designed for 5/8" Bolts. Top pin O.D. 7/8", Height Set Flat 7-1/4". Bottom Base 12-15/16" Long by 9-5/8" Wide. All 3 pivots marked 0-90
Tools - Minot, ND
$200
Floyd Roll
2024-07-11 15:12:06
3 Photos
Erickson (Kennametal) TG138 Collet Chuck | Potential Machine Tool Spindle
Includes 7 TG-138 Collets: 1/2", 5/8", 49/64" (Clamping Range to 3/4"), 7/8", 1", 1-1/8" and 1-1/4". The Chuck is New Old
Tools - Minot, ND
$70
Floyd Roll
2024-07-11 15:11:37
3 Photos
Kennametal TG150 Collet Chuck | Potential Machine Tool Spindle
New Old Stock, 2" Shank comes with one (Used) 1.5" Collet P/N SS200TG150117. The Shank has 1.167" inside threads (1.25" O.D.?) I don't
Tools - Minot, ND
$65
Floyd Roll
2024-07-11 15:11:11
3 Photos
ERICKSON SUNDSTRAND TG100 COLLET CHUCK | Potential Machine Tool Spindle
O.D. of the Shank is 2", Includes one 3/4" TG100 Collet. Chuck Range is 3/32" to 1"
Tools - Minot, ND
$30
Floyd Roll
2024-07-11 15:10:40
3 Photos
Roll About Tool Tray | Stand | Salon Equipment
Rolling Tool Tray | Stand Stainless Steel Salon Equipment 21-1/2" x 15-1/2" Stainless Steel Tray. 28" to 36" Adjustable Height
Salon & Spa - Minot, ND
$25
Floyd Roll
2024-07-11 15:10:15
3 Photos
NMTB-50 Taper DeVlieg Microbore C8 Collet Chuck with 13 Collets
All but 2 Collets are Sandvik Coromant (as noted), Sizes are: 3/8", 1/2" Balas, 9/16", 19/32", 5/8", 11/16", 23/32", 3/4". 13/16",
Tools - Minot, ND
$60
Floyd Roll
2024-06-17 18:11:43
3 Photos
ISCAR EMT Morse Taper 5 (MT5) ER40 Collet Chuck
Family: MT-ER A DIN 6499 ER40 Collet Chuck with a DIN 228-2 Morse Taper 5 Shank. Includes the ISCAR Preset 28x1.5 Screw Plug (Depth Set Screw). Used
Tools - Minot, ND
$200
Floyd Roll
2024-06-17 18:11:16
3 Photos
NEW! PARLEC NMTB50 Collet Milling Chuck N50-75SC3-LDX
Accepts 75PG / 75TG COLLET SERIES - .031-.750" (.8-19MM) Collet seat taper T.I.R. 0.0002" Collet face within 0.06 of nut face for maximum rigidity.
Tools - Minot, ND
$40
Floyd Roll
2024-06-17 18:10:56
3 Photos
2" NMTB 50 Taper End Mill Holder Universal Engineering p/n 4611046
Tools - Minot, ND
$35
Floyd Roll
2024-06-13 18:17:24
3 Photos
NEW! COLLIS Collet Chuck # 78304 | TG150 Series Morse Taper 5 (MT5)
Holds tooling with shanks up to 1-1/2" with single angle collets. Made in USA! (The Good Stuff)
Tools - Minot, ND
$180
Floyd Roll
2024-06-13 18:17:03
3 Photos
NEW! JANCY AB4MT #4MT | Morse Taper 4 Coolant Thru Arbor
for 3/4" Series Weldon Shank Rotabroach/Slugger/Annular Cutters. Annular Cutter in 3rd Photo is NOT Included. Pictured just to show what the
Tools - Minot, ND
$100
Floyd Roll
2024-06-13 18:16:43
3 Photos
NEW! Kennametal KSSP300R4SD43L240 Modular 3" Milling Head
Includes all 20 inserts screws. The one pictured is not included (just to show type used). Also included is a Universal Engineering Kwik
Tools - Minot, ND
$250
Floyd Roll
2024-06-13 18:16:20
3 Photos
NEW! Kennametal KSM3005RAN25423105 Modular 3" Milling Head
Includes 20 New ANGT254PPFR6LGJ Inserts, Grade: KC730 and a Kwik Switch 400 1 1/4" Shell End Mill Arbor.
Tools - Minot, ND
$400
Floyd Roll
2024-06-13 18:15:38
3 Photos
NEW! 3 HP DC MOTOR Electric Kart / EBike / Project 2.75hp 12.8 VDC 12 VOLT
Motor Flange O.D. 6.5", 0.6205" Thick. Bolt Circle 6" Center x 4 Threaded Holes 3/8-16 tpi. 4.4825 O.D. Locating-Centering
Bikes & Equipment - Minot, ND
$250
Floyd Roll
2024-06-13 18:15:12
3 Photos
1" Kwik-Switch 400 End Mill Holder Universal Engineering p/n 80447
Tools - Minot, ND
$40
Floyd Roll
2024-06-13 18:14:14
3 Photos
3/4" Kwik-Switch 400 End Mill Holder Universal Engineering P/N's 80445
Tools - Minot, ND
$40
Floyd Roll
2024-05-01 17:52:27
Forged T-Slot Bolts 3/4"-10 UNC Thread Grade 5 ZIP Bolts 30026
QTY. 8, 8" Length Under Head, OAL 8.432", Thread Length 2-1/2", Slot Width 0.755", Head Dimensions 0.432" x 1.25" (Nominal). Of course
Tools - Minot, ND
$40
Floyd Roll
2024-05-01 17:52:08
3 Photos
2 Sets | Jacobs 900 Series Rubber Flex Collets 1/16" ~ 1-3/8"
Also included are the 4 Largest Plugs (Used to Chuck Up Short Stuff), [7/8"~1"], [1"~1-1/8"], [1-1/8"~1-1/4"], [1-1/4"~1-3/8"].
Tools - Minot, ND
$200
Floyd Roll
2024-04-01 17:33:31
2 Photos
Dorian QUADRA QITP25-36 #36 5C Lathe Tool Collet Holder w/1" Hardinge Collet
Tools - Minot, ND
$100
Floyd Roll
2024-03-30 14:35:54
3 Photos
Antique Cast Iron Wagon Jack | Old Barn De'cor
$100 (EACH) Will sell one at a time.
Antiques - Minot, ND
$100
Floyd Roll
2024-03-30 14:35:24
3 Photos
NEW! CAT 50 Automotive Shank Adapter with a BILZ Size #2 Tap Driver 1 3/8''
Kennametal C156403A02 CL6, BILZ WFP2 Tap Driver #0706124.
Tools - Minot, ND
$50
Floyd Roll
2024-03-30 14:34:59
3 Photos
NEW! Kwik-Switch 400 Power Grip Mill Chuck
Kennemetal K400SD752570 and Wrench. Uses 3/4" O.D. Reduction Sleeves for 1/8" to 5/8" Shank End Mills (Tooling). Collets slide into the Nose of the Chuck.
Tools - Minot, ND
$60
Floyd Roll
2024-03-30 14:34:31
3 Photos
NEW! Kwik Switch 400 Master Holder NMTB-50 Taper | Universal Engineering #809184
I have Collet Chucks, Boring Bars and Heads, End Mill Holders, Shell Mill Holders, Drill Chucks Morse Taper Adapters.
Tools - Minot, ND
$250
Floyd Roll
2024-03-30 14:33:55
3 Photos
Universal Eng. Kwik-Switch 400 Microbore Boring Bar Unit, P/N: 805723
Bore Range 2-7/16" to 3-7/16". Rigibore Boring Cartridge R7A2, and one TCMT 16T308 FG CT3000 TAEGUTEC Insert. Cerment P05-P25
Tools - Minot, ND
$98
Floyd Roll
2024-03-30 14:33:33
3 Photos
Kwik-Switch 400 Adapter with Ingersoll 3" Indexable Facemill 6K6V 03R06
Universal Engineering #80435 Shell End Mill Adapter 1" Arbor. Uses NNE 324 Inserts. If you are interested in the Face Mill
Tools - Minot, ND
$140
Floyd Roll
2024-03-30 14:33:09
3 Photos
NEW! Alisam QCR-100 Quick Change Lathe Tool Holder Rack
AXA Size. With one of these you can mount 2 of your AXA size tool holders to your tool chest, bench or on the wall. 8 available. The DORIAN
Tools - Minot, ND
$15  Each
Floyd Roll
2024-03-30 14:32:48
2 Photos
Kwik-Switch 400 Series TG100 COLLET CHUCK w/1" Collet
Tools - Minot, ND
$55
Floyd Roll
2024-03-30 14:32:11
3 Photos
JACOBS Spindle Nose Lathe Chuck D1-3 Camlock Mount w/2 Collet Sets 1/16"~1-3/8"
Tools - Minot, ND
$450
Floyd Roll
2024-03-30 14:31:48
3 Photos
NEW! Valenite 2" Coolant Thru Indexable Drill VWDR-200-125W-200
VAL-U-DEX-HP 1-1/4" Shank, +20 WCEM 421-3P VC111 inserts. Made in USA
Tools - Minot, ND
$110
Floyd Roll
2024-03-30 14:31:27
3 Photos
JACOBS Spindle Nose Lathe Chuck D1-6" Camlock Mount w/2 Collet Sets 1/16"~1-3/8"
Tools - Minot, ND
$460
Floyd Roll
2024-03-30 14:31:00
3 Photos
ER40 Lathe Collet Chuck D1-3 Camlock Mount (3901-5041) 125mm Diameter
Tools - Minot, ND
$85
Floyd Roll
2024-03-30 14:30:13
3 Photos
CAT-50 TG-150 Collet Chuck ERICKSON CV50-TG150 300 | Gauge 3"
Tools - Minot, ND
$30
Floyd Roll
2024-03-30 14:29:45
3 Photos
CAT-50 TG-100 Collet Chuck Scully-Jones-4 5510 CS-1382-8E 5.25" Gauge
Tools - Minot, ND
$25
Floyd Roll
2024-03-30 14:28:52
3 Photos
1"-5 Pitch ACME Threaded Rod and Nut
ENCO 1"-5 Acme Threaded Rod | C1018 Steel Min Tensil Strength (typ) 64,000 psi, Hardness 126 Hb. Hex Size 1-5/8", Nut Thread Length 0.990". I made these to set
Tools - Minot, ND
$15
Floyd Roll
2024-03-30 14:28:23
3 Photos
ENCO Super Duty Ball Bearing Drill Chuck 3/8"~1" Capacity w/MT3 Arbor
Enco Model 290-1535. K20-JT5 with Morse Taper 3 Arbor. I purchased this in the mid 1990's. It is in excellent condition as you
Tools - Minot, ND
$120